The EV is ordered, the delivery date is locked in, and now you’re looking at the garage wondering what comes next. Here’s what EV charger installation Melbourne homeowners actually pay in 2026, what happens on the day, and how to tell whether your switchboard is ready before you spend a cent.
Rincon Electrical installs home chargers with same-week availability across Melbourne’s west and services all of Melbourne. Fixed upfront pricing from $900, all major charger brands, 500+ five-star reviews. Call 03 4250 9530 for a fixed quote.
1. EV charger installation Melbourne: the real cost in 2026
For most homes, a professionally installed 7kW charger lands between $900 and $1,500 fully installed. Where your job sits in that range comes down to three things.
The cable run. If your switchboard is close to the garage or carport, you’re at the lower end. A long run across the house, through the roof cavity or underground to a detached garage adds cable, conduit and time.
Your power supply. Single phase suits a 7kW charger perfectly, and that’s what most Melbourne homes have. If you have three phase power and want faster charging, the hardware costs a little more.
The charger itself. Brands vary in price. If your car came with a wall unit, we can usually install that and you only pay for the installation work.
Whatever the answer, we quote the whole job before any work starts. The price we give is the price you pay, and every install is covered by our lifetime workmanship warranty.
2. Home EV charger installation Melbourne: choosing the right unit
For nearly every household, the right answer is a 7kW single phase smart charger. A 7kW unit adds roughly 40km of range per hour, which means even a nearly flat battery is full by morning. Faster 22kW units exist, but they need three phase power most homes don’t have, and when the car sits in the garage ten hours a night, the extra speed changes nothing about your life.
Smart chargers earn their keep. Scheduling lets the car drink during off-peak hours for a few dollars a night, and solar-aware models soak up your excess daytime generation instead of exporting it for cents. We handle home EV charger installation Melbourne wide and will tell you straight which features are worth paying for and which are gimmicks.
3. Will your switchboard handle an EV charger?
This is the one thing worth checking before you buy anything. A charger is one of the largest single loads you can add to a house, and it needs its own dedicated circuit protected by a safety switch.
Newer estates are almost always fine. Older homes running their original board may need a switchboard upgrade first, which typically costs $900 to $1,800.
Do you automatically need one? No. We check your board as part of quoting, and if it’s up to the job we’ll say so. If it isn’t, you’ll know the full combined cost before anything starts, not halfway through the install.
4. What happens on installation day
A standard installation takes two to four hours. We mount the charger where it best suits your parking position, run a dedicated cable from the switchboard, fit the circuit breaker and safety switch, then test everything under load.
Before we leave, we set up the app and charging schedule, walk you through the unit, and hand over your Certificate of Electrical Safety. You plug in that night and wake up to a full battery.
5. EV charger installation Werribee, Hoppers Crossing and Wyndham Vale
Melbourne’s west is one of the fastest-growing EV corridors in the country, and it’s our home patch. These three suburbs get our fastest response and same-week installation.
EV charger installation Werribee
From established streets to the newer pockets near Riverwalk, we install all charger brands across Werribee, usually within the week. Older Werribee homes sometimes need the switchboard looked at first; we check that in the quote so there are no surprises.
EV charger installation Hoppers Crossing
Hoppers Crossing homes are a mix of 80s and 90s builds where the switchboard check really matters. We quote the charger and any board work together, as one fixed price.
EV charger installation Wyndham Vale
Most Wyndham Vale homes are new enough that the board is ready to go, which keeps installs quick and at the lower end of the price range. Manor Lakes and the surrounding estates are the same story.
Outside the west? We install EV chargers right across Melbourne, from Geelong to the bayside and everywhere between. Distance doesn’t change our pricing approach: fixed quote first, always.
6. Charging at home vs public charging: the maths
Charging overnight at home on an off-peak rate typically costs $3 to $6 for a full charge, depending on your plan and battery size. The same charge at a public fast charger can run $25 to $40. Charge twice a week and home charging pays off the installation inside the first year or two, before counting the hours you don’t spend sitting at a charging station.
Rebates for chargers come and go at both state and federal level. It’s worth checking Solar Victoria for any current programs before you book; when something is available, we’ll factor it into the quote.
7. Why this is a licensed electrician job
In Victoria, EV charger installation is legally restricted to licensed electricians, and Energy Safe Victoria is blunt about why: the charger draws serious, sustained current for hours at a time. An undersized cable or a loose connection isn’t a minor defect, it’s a fire risk that runs all night while you sleep.
A licensed install also protects your charger warranty, your home insurance and your resale paperwork. Every Rincon installation is performed by a licensed electrician and certified on completion.
Three questions to ask any installer (including us)
Is the price fixed before you start? If the answer involves the words “it depends” after the quote is given, keep looking. The site visit or photo assessment happens before the quote, not after the invoice.
Is the charger on its own dedicated circuit with a safety switch? It must be. A charger sharing a circuit with the garage power points is a corner cut, and it’s the kind that trips breakers at best and overheats cable at worst.
Who handles the certificate? Every electrical installation in Victoria must be certified on completion. The installer lodges it, not you. If they’re vague about the paperwork, that tells you something about the wiring you can’t see.
EV charger installation FAQs
How much does EV charger installation cost in Melbourne?
Most homes pay between $900 and $1,500 fully installed for a 7kW smart charger. Long cable runs, three phase hardware or a switchboard upgrade add to that, and we quote the full amount upfront before work starts.
How long does the installation take?
Two to four hours for a standard job. A long cable run or a switchboard upgrade on the same visit can extend it to a full morning.
Do you install all EV charger brands?
Yes. Tesla Wall Connector, myenergi zappi, Fronius, Wallbox, Ocular and the unit supplied with your vehicle. Already own a charger? We can usually install it.
Can I just charge from a normal power point?
You can trickle charge from a standard outlet, adding about 10km of range per hour. It works as a stopgap if the outlet is in good condition, but it’s slow and was never designed as a permanent charging setup.
I’m renting. Can I still get a charger installed?
Yes, with the owner’s written permission. Otherwise, a portable charger from a standard outlet is the no-permission option, just slower.
Does a home EV charger add value to my house?
Increasingly, yes. With EV uptake climbing across Melbourne’s growth corridors, a professionally installed charger is becoming a genuine selling feature, the way solar did a decade ago.
Ready to charge at home?
Fixed upfront pricing from $900. Same-week EV charger installation across Werribee, Hoppers Crossing, Wyndham Vale and all of Melbourne. Installed by licensed electricians, certified on completion, backed by a lifetime workmanship warranty.
Call Rincon Electrical on 03 4250 9530 or book online for your fixed quote.
